View Full Version : How doe you change the cabin air filter in 2006 gmc sierra?

03-06-2012, 04:11 AM
This is how you change the cabin air filter in GMC Sierra. Thanks to ehow.com for these instrucitons:

1. Park your Sierra on a flat and level spot. Place an old blanket or dropcloth on the ground beside the passenger side door. Open the passenger side door. You'll be doing a lot of work down low, so get comfortable.
2. Take the flashlight and look for the plastic panel that is located underneath the glove box. On most Sierra models, this is held in place with four screws. Use the screwdriver to remove the screws. Take the panel and screws and set them aside.
3. Locate the hinged door to the air cabin filter located beneath the panel you removed. Remove the screw holding the door in place and allow the door to swing open downwards.
4. Remove the old air filter by pulling downwards. Replace the new air filter in the slot, making sure that the arrows on the filter are pointing towards the cabin.
5. Close the cabin air filter door and secure in place with the screw.
6. Replace the access panel. Secure with the screws.
Easy peasy.